A fast and easily customised operating system
for ARM devices
*Configure Data
Programmer's Reference Manuals
» Part 17 - *Commands
» *Commands - Sorted By Name
» *Configure Data
*Configure Data
Use
This *Command sets the configured data format for the serial port.
Syntax
*Configure Data n
Parameters
| n | Data word format (0 – 7) |
| n | Word length | Parity | Stop bits |
|---|---|---|---|
| 0 | 7 | Even | 2 |
| 1 | 7 | Odd | 2 |
| 2 | 7 | Even | 1 |
| 3 | 7 | Odd | 1 |
| 4 | 8 | None | 2 |
| 5 | 8 | None | 1 |
| 6 | 8 | Even | 1 |
| 7 | 8 | Odd | 1 |
Notes
The default value is 4.
The change takes effect following the next reset.