A fast and easily customised operating system
for ARM devices
OS_Byte 182
Programmer's Reference Manuals
» Part 15 – SWI Calls
» OS
» OS_Byte
» OS_Byte 182
OS_Byte 182
(SWI &06)
| Entry | |
|---|---|
| R0 | 182 (&B6) |
| R1 | EOR value |
| R2 | AND value |
| Exit | |
|---|---|
| R0 | Preserved |
| R1 | Status before being overwritten |
| R2 | No ignore state (see OS_Byte 182) |
Use
The purpose of this call is to read or write the printer NoIgnore state.
Notes
If bit 7 is clear then the ignore character set by OS_Byte 6 or OS_Byte 246 is filtered from the printer output stream. If bit 7 is set, then the printer stream passes all characters. The default state of this bit is stored in OS_Byte CMOS 15.
The default setting of this flag is controlled by *Configure Ignore and may be changed temporarily using *Ignore.