h6. [[Programmer's Reference Manuals]] h6(. » [[*Commands]] h6((. » *Configure FontMax1 h2. *Configure FontMax1 h4. Use This *Command sets the configured maximum height at which to scale from a bitmap font rather than from an outline font. h4. Syntax *Configure FontMax1 _max_pointsize_ h4. Parameters |<^{width:8em}. _max_pointsize_|<^. Maximum height (pointsize) of font to scale from bitmap to outline font| h4. Notes This setting is only valid with 4bpp screen modes. Before this setting is used, the following checks are made; # Look for f9999x9999 file of the correct size, then; # Look for x90y45 font of the correct size; # Check values in [[*Configure FontMax2|FontMax2]] and [[*Configure FontMax3|FontMax3]], then; # Check values in [[*Configure FontMax4|FontMax4]] and [[*Configure FontMax5|FontMax5]], then; # If the above checks fail to produce an output will it consider the value of FontMax1. Pixel height = height in points x pixels per inch / 72 The pixel height varies depending on the different resolution of screen mode. h4. See also * [[Font_ReadFontMax]] * [[Font_SetFontMax]] * [[*Configure|*Configure]] * [[*Configure FontMax2|*Configure FontMax2]] * [[*Configure FontMax3|*Configure FontMax3]] * [[*Configure FontMax4|*Configure FontMax4]] * [[*Configure FontMax5|*Configure FontMax5]]