h6. [[Programmer's Reference Manuals]] h6(. » [[*Commands]] h6((. » *Configure Data h2. *Configure Data h4. Use This *Command sets the configured data format for the serial port. h4. Syntax *Configure Data _n_ h4. Parameters |<^{width:8em}. _n_|<^. Data word format (0 – 7)| |_<^{width:2em}. n|_<^{width:8em}. Word length|_<^{width:4em}. Parity|_<^{width:2em}. Stop bits| |<^. 0 |<^. 7 |<^. Even|<^. 2 | |<^. 1 |<^. 7 |<^. Odd|<^. 2 | |<^. 2 |<^. 7 |<^. Even|<^. 1 | |<^. 3 |<^. 7 |<^. Odd|<^. 1 | |<^. 4 |<^. 8 |<^. None|<^. 2 | |<^. 5 |<^. 8 |<^. None|<^. 1 | |<^. 6 |<^. 8 |<^. Even|<^. 1 | |<^. 7 |<^. 8 |<^. Odd|<^. 1| h4. Notes The default value is 4. The change takes effect following the next reset. h4. See also * [[OS_SerialOp 1]] * [[*Configure|*Configure]] * [[*Configure Baud|*Configure Baud]]