GPIO6 usage
Chris Hall (132) 3504 posts |
Does RISC OS use GPIO6 on the Raspberry PI? I am using it as an input (pin 31 on the 40 pin connector) and am getting spurious signals on it (goes high for around a second). It has a 60k pull up resistor on chip and I am holding it at 0V via a long (3m) wire to some relay contacts. Other input pins such as GPIO5 and GPIO8 have similar connections but no spurious signals. Any ideas please? |
Neil Fazakerley (464) 124 posts |
I suppose the test would be does GPIO6 still show spurious signals when you have nothing connected to it? |