A fast and easily customised operating system
for ARM devices
*Configure Boot
Programmer's Reference Manuals
» *Commands
» *Configure Boot
*Configure Boot
Use
This *Command sets the configured boot action so that a power-on, reset or Ctrl-Break runs a boot file.
Syntax
*Configure Boot
Parameters
None.
Notes
If the shift key is pressed when a machine is powered on, or reset, then no boot will take place.
The boot process looks for the &.!Boot file, and if found runs it, as set by the *Opt 4 command.
A boot process can be disabled at any time by issuing *FX 255 command.
NoBoot is the default setting.
Any change takes effect on the next power-on or hard reset.
See also
Social
Follow us on
and
and
ROOL Store
Buy RISC OS Open merchandise here, including SD cards for Raspberry Pi and more.