Safeguarding the past, present and future of RISC OS for everyone
*Tuning
Programmer's Reference Manuals
» *Commands
» *Tuning
*Tuning
Use
This *Command sets the overall tuning for the *Sound (and *QSound) system.
Syntax
*Tuning relative_change
*Tuning auto <on|off>
Parameters
| relative_change | -16383 to +16383 (0 to reset to default) |
Notes
This command has two forms.
The first form controls the manual tuning. When setting manual tuning, a value of 0 can be specified to reset to the default value.
The second form of the command controls automatic tuning. If automatic tuning is on, the tuning value will be automatically adjusted to match changes in the sound system sample rate. If automatic tuning is enabled then any attempt to set the manual tuning value will be silently ignored.
Automatic tuning first became available in RISC OS 5.19 (SoundChannels 1.37), and is enabled by default.
See also
Social
Follow us on
and
and
ROOL Store
Buy RISC OS Open merchandise here, including SD cards for Raspberry Pi and more.